Where does a 7×10 Moroccan rug fit?

Between 6×9 and 8×10 — for living rooms of 13–14 ft × 17–18 ft, or king bedrooms where 6×9 reads slightly small and 8×10 slightly large. The dimension solves specific scale problems.

Is 7×10 a common Moroccan rug size?

Less marketed than 6×9 and 8×10, but common in vintage production because traditional Atlas weavers worked to non-standard dimensions. The 7×10 zone catches many naturally-sized vintage pieces.

What does a 7×10 Beni Ourain cost?

Custom commission from co-operative: $2,400–$3,600 at 80 KPSI; $5,500–$11,000 for high-density Beni Mrirt. Vintage in good condition: $4,500–$15,000 from specialist dealers.

How long does a 7×10 take to weave?

10–14 weeks of one-weaver work at standard Beni Ourain density. With two weavers on the same loom: 6–8 weeks. Higher-density Beni Mrirt: 16–22 weeks single-weaver.

Can I get a custom 7×10 made to spec?

Yes — virtually all Atlas co-operatives accept commissions at this dimension. The 7-foot warp width fits standard looms comfortably, making this an easier custom commission than larger sizes.

Is 7×10 a sign of genuine hand-knotting?

Suggestively — non-standard dimensions are less common in mass-market machine-made imitations because automated production runs are calibrated for standard sizes. A rug at 7×10 is more likely to be hand-knotted than the same rug at perfectly-standard dimensions.

What is 7×10 in centimetres?

7 ft × 10 ft equals 213 × 305 cm. European and metric listings may show 210×300 cm or 215×305 cm; hand-woven rugs vary by a few cm in either direction.

Moroccan Rug 7×10 — Between 6×9 and 8×10

Seven feet by ten feet — 213 by 305 centimetres — is one of the less-marketed Moroccan rug sizes, which makes it the right answer for rooms where the standard 6×9 reads slightly small and the 8×10 reads slightly large. The dimension fits between two common American living-room configurations and has carved out a quiet category in vintage and custom-commission production. Many vintage Beni Ourains from 1960s–80s production landed at non-standard dimensions like 7×10 because hand-woven sizes vary naturally, and these slightly-irregular vintage pieces have a precision that custom-spec contemporary work struggles to replicate.

When 7×10 Is the Correct Answer

Two specific room sizes call for 7×10. First: living rooms of 13×17 or 14×18 feet where 6×9 leaves too much exposed floor border and 8×10 crowds the walls. The 7×10 leaves 30–32 inches of floor border on each side — the textbook ideal for visual balance.

Second: rooms with king beds (76×80 inches) where the rug needs to sit at the foot with comfortable border on either side. A 7×10 extends roughly 24 inches past each side of a standard king and roughly 36 inches past the foot — slightly more than 6×9 provides, slightly less than 8×10. For some king-bed rooms this proportion reads better than either neighbouring size.

Vintage 7×10 — Why Non-Standard Dimensions

Most vintage Moroccan rugs (1950s–80s production) were not woven to Western standard sizes because the concept of 'standard rug sizes' is essentially a Western retail invention. Atlas weavers worked on looms of varying widths and stopped when the rug 'felt right' — often leading to dimensions like 7×9.6 or 6.5×10.2 that don't match any modern category.

Many of these naturally-dimensioned vintage rugs land in the 7×10 zone. For buyers who want a true vintage piece, the non-standard dimension is part of the authentication — perfectly-spec'd 'vintage' rugs at exact 9×12 or 8×10 dimensions are more likely to be recent production than genuine vintage.

Custom Commission for 7×10

Most Atlas co-operatives accept custom commissions at 7×10 dimension. Lead time: 10–14 weeks from order to ready-to-ship at standard Beni Ourain density. Beni Mrirt at 130 KPSI: 16–22 weeks. The dimension is well within the capacity of standard 8-foot-warp looms (the 7-foot warp width fits comfortably) and is one of the easier custom commissions to fulfil.

Commission cost: $2,400–$3,600 for 80-KPSI Beni Ourain at the co-operative; $5,500–$11,000 for high-density Beni Mrirt. Vintage 7×10 in good condition: $4,500–$15,000 from specialist dealers, depending on age, condition, tribal attribution.

Why Designers Quietly Recommend 7×10

Interior designers working on specific room geometries often recommend 7×10 over the more-marketed neighbouring sizes because the dimension solves specific scale problems. The 7×10 is also less common in mass-market machine-made imitations because the dimension does not fit cleanly into automated production runs calibrated for 6×9 or 8×10. A rug at 7×10 is more likely to be genuine hand-knotted than the same rug at perfectly-standard dimensions.

Ciò che potete verificare su di noi

Approvvigionamento diretto: Cooperative dell’AtlanteNessun intermediario tra il tessitore e voi.
Costruzione: Lana annodata a manoVerificata in ogni fase — mai tuftata a macchina.
Provenienza: Documentata per pezzoVillaggio, periodo di tessitura e, dove disponibile, il nome del tessitore.
Resi: 14 giorniNello stato ricevuto, rimborso completo del prezzo d’acquisto.

Domande frequenti

Domande

Where does a 7×10 Moroccan rug fit?: Between 6×9 and 8×10 — for living rooms of 13–14 ft × 17–18 ft, or king bedrooms where 6×9 reads slightly small and 8×10 slightly large. The dimension solves specific scale problems.
Is 7×10 a common Moroccan rug size?: Less marketed than 6×9 and 8×10, but common in vintage production because traditional Atlas weavers worked to non-standard dimensions. The 7×10 zone catches many naturally-sized vintage pieces.
What does a 7×10 Beni Ourain cost?: Custom commission from co-operative: $2,400–$3,600 at 80 KPSI; $5,500–$11,000 for high-density Beni Mrirt. Vintage in good condition: $4,500–$15,000 from specialist dealers.
How long does a 7×10 take to weave?: 10–14 weeks of one-weaver work at standard Beni Ourain density. With two weavers on the same loom: 6–8 weeks. Higher-density Beni Mrirt: 16–22 weeks single-weaver.
Can I get a custom 7×10 made to spec?: Yes — virtually all Atlas co-operatives accept commissions at this dimension. The 7-foot warp width fits standard looms comfortably, making this an easier custom commission than larger sizes.
Is 7×10 a sign of genuine hand-knotting?: Suggestively — non-standard dimensions are less common in mass-market machine-made imitations because automated production runs are calibrated for standard sizes. A rug at 7×10 is more likely to be hand-knotted than the same rug at perfectly-standard dimensions.
What is 7×10 in centimetres?: 7 ft × 10 ft equals 213 × 305 cm. European and metric listings may show 210×300 cm or 215×305 cm; hand-woven rugs vary by a few cm in either direction.

Sources & References

What this page rests on

1. Vintage Carpet Dimension Survey
2. Atlas Co-operative Commission Records

La persona dietro il pezzo

«Prima dell’acquisto vi invio un video del tappeto reale alla luce naturale — non una foto di catalogo. Rispondo io stesso ai messaggi.»

Sono Youssef. Ho fondato ARINID perché questo mercato è pieno di intermediari e di imitazioni fatte a macchina vendute come autentiche — e sono cresciuto abbastanza vicino ai telai da conoscere la differenza.

Ogni pezzo che proponiamo risale alla cooperativa che lo ha tessuto. Se volete parlare delle dimensioni per la vostra stanza, sono dall’altra parte del messaggio. Un tappeto a questo livello è una decisione di trent’anni. Dovreste poter guardare negli occhi chi ve lo vende.

Youssef

Fondatore, ARINID

Scrivimi direttamente →

Il passo successivo

Scoprite ogni Moroccan Rug 7x10 che offriamo attualmente

Ogni pezzo è annodato a mano sull’Atlante e spedito direttamente a casa vostra, con origine e tessitore documentati.

Esplora la collezione Parla con noi